Intermediate flange
Mounting hydraulic cylinder
The flange welded to the cylinder body can be used for cylinder mounting. This makes sure that the cylinder force is applied centrically to the fixation so that no lateral forces are generated.
The cylinder can be mounted from both sides. The flange is equipped with spigots on both sides.
This is a cylinder fixation without any degree of freedom that permits an inflexible installation.
Additional parts for mounting, such as flanges, can be attached to the cylinder.
This attachment is not available in HäKo, but can be requested from Hänchen.
The position of the lugs on the cylinder tube is freely selectable.
Do not strain cylinders when installing.
Single-rod cylinder
with intermediate flange
Double-rod cylinder
with intermediate flange
www.haenchen.de | info@haenchen.de