Seawater, salt spray, long idle periods. Under these conditions, a hydraulic cylinder on board must operate reliably, even after weeks without movement.
This is why Hänchen designs every cylinder for your specific application rather than pulling one from a catalogue, using stainless steel, DUPLEX or Niro, with corrosion protection for seawater resistance and a material certificate. Acceptance according to DNV and LR takes place directly in-house, without your construction project having to wait for an external appointment.
The following applies to all our hydraulic cylinders: Hänchen stands for individual designs, excellent quality and the best availability.

Hydraulic cylinders for yachts and naval vessels are used, among other things, for rudder adjustment or for moving stern and side ramps, as hydraulic cylinders for davit systems and much more.
Depending on the application, hydraulic cylinders for maritime applications must be approved by the respective ship classification society. Hänchen designs such as rudder adjustment cylinders, flap cylinders, locking cylinders and special control or actuation cylinders meet these requirements.
Hänchen has been supplying hydraulic cylinders to a wide range of industries since 1952. We use this broad know-how in the further development of our standard range, as well as in the development of custom cylinders. Because special applications require tailor-made solutions.
Rudder blades are controlled by hydraulic rudder adjusting cylinders in single-rod and double-rod construction. For maximum manoeuvrability of the ships, low-friction and high-precision positioning of these hydraulic cylinders is particularly important.
Hydraulic flap cylinders are used in shipbuilding to operate doors, gates and hatches. These actuators can be equipped with integrated interlocks that securely lock the piston rods in the event of pressure drop. Short installation lengths and individual designs are particularly important here.
Ferries and naval ships are sometimes loaded and unloaded via the tailgate. Tailgate cylinders with a watertight ball joint are used to adjust this flap.
A davit is a launching device for tender and rescue boats from ships as well as for swimming platforms or jet skis. The cranes - some of which are pivoting - are mounted on the side near the side wall or on the stern and moved via hydraulic cylinders.
Entering and leaving a ship is via stern and side gangways or yacht ladders. These are extended and retracted by hydraulic cylinders.
Adjustable floors are used on yachts in the pool area. They allow you to individually adjust the pool depth or completely close the pool to use the area as a party deck. Hydraulic cylinders below the pool floor move a scissor lift system. They are always surrounded by pool water (fresh or salt water) and are operated exclusively with water hydraulics.
Super, luxury and mega yachts are built as unique pieces individually according to the ideas of their owners. Design hydraulic cylinders, which are installed in the visible area, have special aesthetic requirements in addition to their functionality. We meet these special design requirements:
Grey ships are needed for reconnaissance, surveillance, deterrence and protection. Here, hydraulic cylinders are often custom-made for the respective application. The small and compact design of the Hänchen cylinders is advantageous here. Further requirements for marine hydraulic cylinders are, for example:
For handling or safety reasons, clamping of the rod may be necessary. Hänchen offers two different technical solutions that can be individually adapted to your requirements.
This is an interlock integrated in the hydraulic cylinder. This can be achieved by means of jaws introduced radially to the cylinder axis, which lock the end position of the cylinder when the piston rod is extended. The locking and unlocking is active-hydraulic.
The hydraulically releasable clamping unit Ratio-Clamp® is a separate product that can be flanged directly to the hydraulic cylinder or installed parallel to it. The clamping unit can serve as a safety element, as it locks the piston rod in the event of pressure drop - at any point. Learn more about the clamping unit as a locking element here.
In shipbuilding, applications include rudder adjustment and steering cylinders, flap cylinders for doors, gates and hatches, stern ramp cylinders with waterproof spherical gimbals, as well as hydraulic cylinders for davit systems, ship access systems and lifting platforms.
Depending on the application, the respective ship classification society inspects and accepts the hydraulic cylinder. Hänchen conducts inspections according to DNV and LR directly in-house.
Stainless steel, DUPLEX steel and Niro, each with corrosion protection for seawater resistance and with a material certificate.
Hydraulic pressure up to 320 bar, bore up to 300 mm and stroke up to 6,000 mm.
In two ways: via an integrated locking mechanism in the cylinder that locks the end position when the piston rod is extended using radially inserted jaws, or via the hydraulically releasable Ratio-Clamp® clamping unit as a separate component that locks at any desired position.