Protection tubes series 320
Overview of protection tubes at test cylinders
The best choice of protection tube depends on the series, the type of effect of the cylinder (single-rod or double-rod), and the type of position transducer.
 for cylinder mounting on cap-side |
series 320 double-rod | protection tube for piston rod plain | for position transducer inductive |
 for cylinder mounting on cap-side |
series 320 double-rod | protection tube for piston rod plain & protection tube for position transducer for mounting | for position transducer magnetostrictive |
 heavy cylinder foot for upright mounting |
series 320 double-rod | protection tube for piston rod cone-shaped | for position transducer inductive or magnetostrictive |
 only as a protection for piston rod and transducer, no mounting for the cylinder |
series 320 double-rod | non-load-bearing protection tube for piston rod & protection tube for position transducer without mounting | for position transducer magnetostrictive |
Assignment of the standard spherical plain bearings on protection tubes with spherical bearings
| series cylinder | standard accessory |
spherical bearing ISO 12240-1 |
bearing clearance | fixation of bearing |
| 320 | Hänchen | Form E (DO) maintenance required | Group 2 | with snap ring |
Group 2 = narrow clearance
www.haenchen.de | info@haenchen.de