Start-up - Clamping Unit Instruction Manual

Instruction manualClamping units

Start-up
Clamping Units: Ratio-Clamp^® and Safety Catcher

DANGER!

Danger to life due to improper start-up!

Ensure that the start-up is carried out exclusively and properly by trained specialist personnel or certified hydraulic specialists.

DANGER!

Danger to life due to high pressure!

Only start up the machine or partly completed machine, in which Hänchen products are installed, when the machine or partly completed machine complies with the provisions of the Machinery Directive.
Only start up the hydraulic system with fully connected hydraulic and electrical lines.

Before starting up the clamping unit:

Ensure that the maximum pressure specified on the type plate is not exceeded, even during pressure peaks.
Observe permissible values on the engineering drawing and order confirmation for:
- maximum piston speed
- working temperature
- holding loads
Completely remove preservative.
Ensure that sealing elements are not stuck by preservative.

Print page

www.haenchen.de | info@haenchen.de