Return or disposal hydraulic cylinders and clamping units
In order to subject Hänchen products to maintenance at the manufacturer's plant, they shall be returned in packaging protected against environmental influences.
Notice
Environmental pollution and risk of slipping due to leaking hydraulic oil
Capture or bind leaking hydraulic oil in a suitable container.
Dispose of leaking hydraulic oil in an environmentally friendly manner.
Returning hydraulic cylinders
Ship the hydraulic cylinder as a whole.
Close hydraulic ports against pollution and leaking oil.
Secure the piston rod against extending.
Ship hydraulic cylinders in suitable packaging.
Returning clamping device Ratio-Clamp®
Close hydraulic ports against pollution and leaking oil.
Insert the transport rod into the Ratio-Clamp® clamping unit from the releasing side or release the clamping unit and insert the key into the transport position.
Ship the clamping device in suitable packaging.
Disposal
Dispose of packaging and replaced parts in accordance with the regulations of the country in which the Hänchen product was installed.
Dispose of Hänchen products in accordance with national regulations.