User guide for instruction manual
Hänchen products
Target Audience
This instruction manual is intended for trained specialist personnel and certified hydraulic specialists. The content of this instruction manual must be made accessible to those persons entrusted with the assembly and operation of Hänchen products.
Assembly and instruction manual
Warning notices
Warnings are structured as follows:
| SIGNAL WORD! | Type and source of the hazard! Consequences if not observed
|
Warnings differ according to the type of hazard as follows:
| Signal Word Panel | Type of Hazard |
| DANGER! | Warns of an immediately impending hazard that will result in death or serious injury if not avoided. |
| WARNING! | Warns of a potentially hazardous situation that could result in death or serious injury if not avoided. |
| CAUTION! | Warns of a potentially hazardous situation that could result in moderate or minor injury if not avoided. |
| NOTE | Warns of a potentially hazardous situation that could result in property damage or environmental harm if not avoided. |
Tips, Notes, Recommendations
Provides the user with tips, notes, or recommendations for efficient handling of the product.
Action Instructions
Action instructions prompt you to perform an action or a work step. Always carry out the action instructions individually and in the specified order.
Action instructions are structured as follows:
|
Applicable Documents
For the safe and correct use of the product, also observe the additionally supplied documents (e.g., delivery documents, engineering drawings, design documents) and relevant standards and laws.
Symbols on the product
The product features the following safety and health protection markings:
Type plate with maximum permissible pressure
Example Hydraulic Cylinder Type Plate
|
|
The type plates for pressure transformers, clamping units, and vibration and structure-borne sound absorber also contain the product-specific information.