 Double or single rod cylinder with position transducerEconomy Series 126 and 306The quality of the test results always depends on the quality of the test cylinders. Honed cylinder tubes, hard-chromed and honed piston rods fitted with matching quality sealing elements are the guarantee for a whole series of advantages. The series 126 and 306 offer many options: for example the low-cost test cylinders as single rod or double rod cylinder for the wide application range of test purposes up to 7 or 25 Hz, with integrated or external position transducer.
In order to guarantee a safe and reliably controlled drive, Hänchen test cylinders meet the highest technical requirements. This comes naturally to Hänchen and has always been synonymous with
- Particularly low friction
- Optimum sealing capability
- Excellent response characteristics
- Low wear factor
|
- Low break-out torque
- Fatigue strength under vibratory stresses
- Long service life
- Efficiency
|
Possible cover versions | | | | | Servoslide®Sealing system:
Wiper, Grooved ring
Guide system:
Plastic guide - Optimised frictional properties
- Vibration damping
- Largely stick-slip free
- High finish accuracy
- Small guide play
| | Servocop®Sealing system:
Wiper, Grooved ring,
Stepped piston ring
Guide system:
Plastic guide - Optimised frictional properties
- Stick-slip-free movement at very low and very high piston speeds
- High finish accuracy
- Small guide play
| | Servofloat®Sealing system:
Wiper, Leakage seal,
Annular gap seal
Guide system:
Plastic guide - Patented annular gap seal
- Very low-friction cylinder movement
- Non-contact pressure drop to the outside
- Low leakage
- High finish accuracy
- Small guide play
- No wear
- Working without leak oil pump
|
| 
